ECET 220 DeVry Week 5 iLab 5

Downloading is very simple, you can download this Course here:

http://wiseamerican.us/product/ecet-220-devry-week-5-ilab-5/

Or

Contact us at:

SUPPORT@WISEAMERICAN.US

ECET 220 DeVry Week 5 iLab 5

ECET220

ECET 220 DeVry Week 5 iLab 5

 

ECET 220 DeVry Week 5 iLab 5

iLab 5 of 7: Inverting and Noninverting Op-Amps (30 points)

Note! Submit your assignment to the Dropbox, located at the top of this page. (See the Syllabus section “Due Dates for Assignments & Exams” for due dates.)

iLAB OVERVIEW

Scenario/Summary

This week’s lab will apply the lecture material to an experiment on inverting and noninverting op-amp circuits. You will be first analyze the circuit predicting the circuit voltages and currents. Next, using MultiSim, you will simulate the circuit operation. Finally, you will be assembling the circuit on your breadboard measuring the circuit voltages and currents.

Deliverables

This lab’s deliverables include the laboratory’s worksheet with its Cover Sheet (completed in the typed format shown within the worksheet), Observations/Measurements, and Questions sections. The entire lab is worth 30 points. See worksheet and instruction documents for grading information.

Required Software

MultiSim Software

Access the software at .devry.edu/”>https://lab.devry.edu.

Steps: 1, 2, and 3

iLAB STEPS

STEP 1: Download the Lab

.equella.ecollege.com/file/76daaa05-9624-42b5-b7df-d43cfe5b74cf/40/ECET220_W5_iLab.html#top”>Back to Top

Download the W5 LabInstructions and Worksheet and save them to your PC.

Note: Theseitems arefound in Doc Sharing.

STEP 2: Lab Cover Sheet

.equella.ecollege.com/file/76daaa05-9624-42b5-b7df-d43cfe5b74cf/40/ECET220_W5_iLab.html#top”>Back to Top

Report cover sheets must be completed for all labs. The key parts of these sheets include the following.

  • Objective: A one or two sentence explanation of the purpose of the lab.
  • Results: A statement of the final output, such as if the circuit and software worked properly.
  • Conclusions: Conclusions based on the results—usually directly related to the purpose of the lab.
  • Observations/Measurements: All results from the lab must be recorded on the cover sheets. Turn in the cover sheets for grading and retain the remainder of the lab as worksheets.

STEP 3: Carry Out Instructions for Theoretical Analysis in Part III: Procedure

.equella.ecollege.com/file/76daaa05-9624-42b5-b7df-d43cfe5b74cf/40/ECET220_W5_iLab.html#top”>Back to Top

Follow the instructions in Part A: Theoretical Analysis, and record all required measurements.

In this part, you will be predicting the characteristics of a parallel circuit using the various laws that we have discussed for the analysis. Make sure you go over the exercise problems embedded in the lecture to get a better understanding. Use proper units along with engineering notation to represent the electrical quantities.

See Part A: Theoretical Analysis in the lab’s instructions document.

STEP 4: Complete MultiSim Simulation Results in Part III: Procedure

.equella.ecollege.com/file/76daaa05-9624-42b5-b7df-d43cfe5b74cf/40/ECET220_W5_iLab.html#top”>Back to Top

Using MultiSim, perform the steps identified recording the required measurements.

In this part, you will be using technology to verify your predictions. You will be using MultiSim to simulate the given circuit. Record the required parameters as indicated by the meters and calculate the other quantities based on these measurements. Make sure to copy and paste the circuit from here into the Word document and let the page adjust to auto fit.

See Part B: MultiSim Simulation Results in the lab’s instructions document.

STEP 5: Complete Experimental Breadboard Results in Part III: Procedure

.equella.ecollege.com/file/76daaa05-9624-42b5-b7df-d43cfe5b74cf/40/ECET220_W5_iLab.html#top”>Back to Top

Construct the circuit. Perform the steps identified by recording the required measurements.

See Part C: Experimental Breadboard Results in the lab’s instructions document.

STEP 6: Complete Results Analysis in Part III: Procedure

.equella.ecollege.com/file/76daaa05-9624-42b5-b7df-d43cfe5b74cf/40/ECET220_W5_iLab.html#top”>Back to Top

Record the data collected from this experiment and determine the error percentages.

See Part D: Results Analysis in the lab’s instructions document.

STEP 7: Transfer Recorded Values to Observations/Measurements

.equella.ecollege.com/file/76daaa05-9624-42b5-b7df-d43cfe5b74cf/40/ECET220_W5_iLab.html#top”>Back to Top

Copy the recorded results for Questions A, B, C, and D in Part III: Observations/Measurements section of the lab. This is the page immediately following the Cover Sheet in the worksheet.

STEP 8: Answer Questions Section

.equella.ecollege.com/file/76daaa05-9624-42b5-b7df-d43cfe5b74cf/40/ECET220_W5_iLab.html#top”>Back to Top

Make sure to completely answer all of the questions in this lab’s worksheet.

STEP 9: Verify Completion of the Cover Sheet

.equella.ecollege.com/file/76daaa05-9624-42b5-b7df-d43cfe5b74cf/40/ECET220_W5_iLab.html#top”>Back to Top

Type all required information onto the Cover Sheet section in the worksheet.

See Step 2: Complete the Lab Cover Sheet in the iLab Steps shown above on this page for specific information.

STEP 10: Submit Your Deliverables

.equella.ecollege.com/file/76daaa05-9624-42b5-b7df-d43cfe5b74cf/40/ECET220_W5_iLab.html#top”>Back to Top

Submit only the worksheet with its Cover Sheet, Observations/Measurements, and Questions sections.

See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

.equella.ecollege.com/file/76daaa05-9624-42b5-b7df-d43cfe5b74cf/40/ECET220_W5_iLab.html#top”>