GSCM 520 DeVry All Week Case Studies

Downloading is very simple, you can download this Course here:

http://wiseamerican.us/product/gscm-520-devry-week-case-studies/

Or

Contact us at:

SUPPORT@WISEAMERICAN.US

GSCM 520 DeVry All Week Case Studies

GSCM520

GSCM 520 DeVry All Week Case Studies

 

GSCM 520 DeVry Week 1 Case Study

Case—The Tao of Timbuk2 (p. 43)

In a three-page paper, answer the following.

  • Consider the two categories of products that Timbuk2 to makes and sells. For the custom messenger bag, what are the key competitive dimensions that are driving sales? Are their competitive priorities different for the new laptop bags sourced in China?
  • Compare the assembly line in China to that in San Francisco along the following dimensions: (1) volume or rate of production, (2) required skill of the workers, (3) level of automation, and (4) amount of raw material and finished goods inventory.
  • Draw two diagrams, one depicting the supply chain for those projects sourced in China and the other depicting the bags purchased in San Francisco. Show all the major steps, including raw material, manufacturing, finished goods, distribution inventory, and transportation. Other than manufacturing costs, what other course should Timbuk2 consider when making the sourcing decision?

The Tao of Timbuk2

Review the The Tao of Timbuk2 case study on page 43 in the textbook. You can find the questions for this case study in Doc Sharing.

Compose an APA-formatted Word document, no more than three pages in length; please answer each of the questions in the presented case study.

You might want to use Microsoft Visio software for the final question of this case. See the Syllabus for tips on using MS Visio. You may already have Visio installed on your computer; if not, you can access the software from the iLab under Course Home.

Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these .next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=184″>step-by-step instructions or watch this Tutorial .next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=232″>Dropbox Tutorial.

See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

 

GSCM 520 DeVry Week 2 Case Study

Shouldice Hospital—A Cut Above

Review the Shouldice Hospital case study on page 115 in the textbook. You can find the questions for this case study in Doc Sharing.

Compose an APA-formatted Word document, no more than three pages in length; please answer each of the questions in the presented case study.

Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these .next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=184″>step-by-step instructions or watch this

Case—Shouldice Hospital—A Cut Above (p. 115)

In a three-page paper, answer the following.

  • How well does the hospital currently utilize its beds?
  • Develop a similar table to show the effects of adding operations on Saturday. (Assume that 30 operations would still be performed each day.) How would you affect the utilization of the bed capacity? Is this capacity sufficient for the additional patients?
  • Now look at the effect of increasing the number of beds by 50%. How many operations could the hospital perform per day before running out of bed capacity? (Assume operations are performed 5 days per week, with the same number performed on each day.) How well will the new resources be utilized relative to the current operation? Could the hospital really perform that many operations? Why? (Hint: look at the capacity of the 12 surgeons and the five operating rooms.)

 

 

GSCM 520 DeVry Week 3 Case Study

Select one of the following.

Quality Parts Company

Review the Quality Parts Company case study on page 426 in the textbook, and refer to the questions noted in Doc Sharing.

Value Stream Mapping

Review the Value Stream Mapping case study on page 428 in the textbook, and refer to the questions noted in Doc Sharing.

Pro Fishing Boats

Review the Pro Fishing Boats case study on page 428 in the textbook, and refer to the questions noted in Doc Sharing.

You might want to use Microsoft Visio software to create a Value Stream Map. See the Syllabus for tips on using MS Visio. You may already have Visio installed on your computer; if not, you can access the software from the iLab under Course Home.

Compose an APA-formatted Word document, no more than three pages in length; please answer each of the questions from the presented case study of your choice.

Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these .next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=184″>step-by-step instructions or watch this .next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=232″>Dropbox Tutorial.

See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

 

Case—Quality Parts Company (p. 426)

In a three-page paper, answer the following.

  • Which of the changes being considered by the manager of Quality Parts Company are counter to the lean philosophy?
  • Make recommendations for lean improvements in such areas as scheduling, layout, kanban, task groupings, and inventory. Use quantitative data as much as possible; state necessary assumptions.
  • Sketch the operation of a pull system for running Quality Parts Company’s current system.
  • Outline a plan for introducing lean at Quality Parts Company.

 

Case—Value Stream Mapping (p. 428)

In a three-page paper, answer the following.

  • Eliminating the queue of work dramatically quickens the time it takes a part to flow through a system. What are the disadvantages of removing those cues?
  • How do you think the machine operators would react to the change?
  • What would you do to ensure that the operators were busy?

 

Case—Pro Fishing Boats—A Value Stream Mapping Exercise (p. 428)

  • Create a value stream map (VSM) of this supply chain. What other information is needed?
  • Where are there risks for supply chain disruptions or stoppages to the flow of materials?
  • Where do opportunities reside in improving supply chain operations, and how has VSM helped to reveal these?

 

 

GSCM 520 DeVry Week 4 Case Study

Toshiba’s Notebook Computer Assembly Line

Review the Toshiba’s Notebook Computer Assembly Line case study on page 199 in the textbook and refer to the questions noted in Doc Sharing.

Compose an APA-formatted Word document, no more than three pages in length; please answer each of the questions from the presented case study.

Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these .next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=184″>step-by-step instructions or watch this

Case—Toshiba’s Notebook Computer Assembly Line (p. 199)

In a three-page paper, answer the following.

  • What is the daily capacity of the assembly-line design by the engineers? · When it is running at maximum capacity, what is the efficiency of the line relative to its use of labor? Assume that the supporter is not included in efficiency calculations?
  • How should the line be redesigned to operate at the initial 250 units per day target, assuming that no overtime will be used? What is the efficiency of your new design?
  • What other issues might Toshihiro consider when bringing a new assembly line up to speed?

 

 

GSCM 520 DeVry Week 5 Case Study

Select one of the following.

  1. Bradford Manufacturing

Review the Bradford Manufacturing case study on page 270 in the textbook and refer to the questions noted in Doc Sharing.

  1. Brunswick Motors

Review the Brunswick Motors case study on page 300 in the textbook and refer to the questions noted in Doc Sharing.

Compose an APA-formatted Word document, no more than three pages in length; please answer each of the questions from the presented case study of your choice.

Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these .next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=184″>step-by-step instructions or watch this .next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=232″>Dropbox Tutorial.

See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

Case—Bradford Manufacturing (p. 270)

  • Prepare an aggregate plan for the coming year, assuming that the sales forecast is perfect. Use the spreadsheet Bradford Manufacturing. In the spreadsheet, an area has been designated for your aggregate plan solution. Supply the number of packaging lines to run and the number of overtime hours each quarter. You will need to set up the course calculations in the spreadsheet.
  • Review your solution carefully and defend your answers.

Case—Brunswick Motors (p. 300)

  • Assume that Phil wants to minimize his inventory requirements. Assume that each order will be only for what is required for a single period. Using the forms in the case, calculate the net requirements and planned order releases for the gearboxes and input shafts. Assume that the lot sizing is done using a lot for lot.
  • Calculate a schedule using lease-total-cost lot sizing. What are the savings with this new schedule?

 

 

GSCM 520 DeVry Week 6 Case Study

Select one of the following.

Inventory Management at Big10 Sweater

Review the Inventory Management at Big10 Sweater case study on page 395 in the textbook and refer to the questions noted in Doc Sharing.

Grainger: Reengineering the China/U.S. Supply Chain

Review the Grainger: Reengineering the China/U.S. Supply Chaincase study on page 455 in the textbook and refer to the questions noted in Doc Sharing.

Compose an APA-formatted Word document, no more than three pages in length; please answer each of the questions from the presented case study of your choice.

Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these .next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=184″>step-by-step instructions or watch this

Case—Inventory Management at Big10Sweater (p.395)

Please address the following.

  • Using the data provided in the text, calculate how much Rhonda and Steve made for taxes last year.
  • What was your reasoning behind using the aggregate demand forecasts when determining the size of your order rather than the individual school forecasts? Should you rethink this or is there a sound basis for doing it this way?
  • How many sweaters should you order this year? Write down your order by individual school. Document your calculations in your spreadsheet. Calculate this based on the aggregate forecasts and also the forecast by individual school.
  • What do you think they could make this year? They are paying for $40,000 and you expect your benefit package addition would be about $1000 per year. Assume that they ordered based on the aggregate forecasts.
  • How should the business be developed in the future?

Case—Grainger: Reengineering the China/U.S. Supply Chain (p.457)

Please address the following.

  • Evaluate the current China/Taiwan logistics costs. Assume a current total volume of 190,000 CBM and that 89% is shipped direct from the supply is plants in containers. Using the data from the case and assume that the supplier-loaded container is 85% full. Assume that consolidation centers are run at each of the four port locations. The consolidation centers only use 40-foot containers and fill them to 96% capacity.
  • Assume that it costs $480 to ship a 20-foot container and $600 to ship a 40-foot container. What is the total cost to get the containers to the United States? Do you include U.S. port costs in this part of the analysis?

 

 

GSCM 520 DeVry Week 7 Case Study

Distribution Center Location—Grainger

Review the Distribution Center Location—Graniger case study on page 477 in the textbook and refer to the questions noted in Doc Sharing.

Compose an APA-formatted Word document, no more than three pages in length; please answer each of the questions in the presented case study.

Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these .next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=184″>step-by-step instructions or watch this

Case—Distribution Center Location-Grainger (p.477)

Please address the following:

Relative to the U.S. distribution network, calculate the costs associated with running the existing system. Assume that 40% of the volume arrives in Seattle and 60% in Los Angeles, and the port processing fee for federal processing at both locations is $5.00 per CBM. Assume that everything is transferred to the Kansas City distribution center by rail, where it is unloaded and quality checked. Assume that all volume is then transferred by truck to the nine existing warehouses in the United States.